Many persons presumed that having insulation material that is constantly moist is a very good thing as far as a fire safety is concerned. Any wet substance is obviously not going to conduct fire. Hence, it is obviously going to retire or retard fire. Well, this logic may be very sound as far as fire safety is concerned.
However, what about the energy efficiency of your house? Moisture reduces the energy efficiency of the insulation material. Hence, you may end up inadvertently improving fire safety and damaging the energy efficiency of your house.
The risk of fire is present but the leakage of heat or cold air from the house will obviously lead to huge expenditure. Further, the air conditioner and heating devices will be required to work overtime. Chances of short circuit will increase. Hence, it is essential that the fire retardant material and the insulation material work at top notch at all times. How to achieve this?
It is important to have a moisture barrier that will prevent moisture from coming in contact with the insulation material. In the same way, it is important to have a vapor barrier to ensure that excessive heat does not come in contact with the insulation material.
If you have opted for fire retardant material, you may not need a specific material to be fixed over the substance used to insulate your house. However, if you have not opted for fireproof material, you will have to clothe the insulation material in fireproof or fire resistance substances.
Needless to say, you will have to check and verify this point before you purchase the same. As such, there is a very little connection between the type of installation and the capacity of the material to retard fire. However, you must check whether loose fill material that is stuffed into the gap is as efficient as boards that are available in the market.
The former is stuffed while the later is simply fitted just as you would fit any board on the wall. The only difference is that the insulating material boards are placed inside the wall and the gap is sealed.
You will have to use the right fire resistant material to ensure that the moisture and the vapor barrier are maintained. Further, you will have to conduct frequent checks in the form of energy audits.
You will also have to consider the nature of the room and its function when choosing the material. Needless to say, all these complicated decisions can be sorted out only when you have sufficient knowledge or when you make use of the expertise or professionals.
For more information on Fireproof Insulation please visit www.fireproofinsulation.org
Article Source: http://EzineArticles.com/?expert=Nazimabee_Woozeer
