The Xbox 360 blinking red lights is a manifestation of a popular Xbox problem called the Red Rings of Death. Generally speaking, the failure is hard ware and this is caused by overheating. Sometimes, though, the failures of the hard ware and software are not caused by hard ware malfunction. Electronic gadgets just get crazy sometimes. There are many recommended solutions and we will discuss them one by one. Hopefully, you get the solution you need from this list.

The first thing you need to do is to check the console and the plugs and cables. A lot of problems that occur with electronic devices have relevance to loose plugs. What you need to do is to unplug everything and plug everything back in and turn the console on. Reconnect the wires and ensure they are securely in place. Reboot the console and you should expect that you should not see Xbox 360 blinking red lights again.

If it does not work and the Xbox 360 blinking red lights is still present, disconnect or remove the hard disk from the console. Sometimes, hard disks cause these problems and all you need to do is to reset. Once you have removed the hard disk, plug the cables back in and reboot the console. If the system I working fine, then shut it down then put the hard disk back.

If you still see the same Xbox 360 blinking red lights, perhaps it is time that you send the console back to Microsoft if you still have warranty. If the warranty is already void, you can go to any good repair shops and then have it fixed. You can also send the console back to Microsoft even if the warranty is already void. However, you will have to pay about 150 USD for this, excluding shipping.