It is not always convenient to grow a climber against a wall, and a free standing support gives flexibility in planning which climbers to grow and where to place them. Climbers can be used to shield an unsightly part of the garden from view as well as adding variety to already attractive areas. If you wish to grow a climber through a tree or a shrub, you must make sure that you have compatible candidates. Neither plant should compete unduly for either moisture nor will nutrients or both suffer. The established plant must also be strong enough to bear the weight of a full grown climber, which can be considerable.
Hedges and apple trees are good candidates for large climbers. The tree should be neither too young nor too old; a young tree may be smothered by the vigorous climber, while the additional burden may be too much for an older, weaker tree during winter storms. Position the climber on the side of the prevailing wind so that it will blow the stems into the support as it grows. After planting the climber, hammer in a short stake next to it and attach one end of a piece of rope to the stake.
Tie the other end of the rope up into the canopy of the supporting plant. Untie the climber from its supporting cane that was supplied when you bought it and unravel the stems. The climber can then be ties into the rope and the longer stem sup into the canopy of the tree of shrubs. Do not, as is sometimes recommended, secure the bottom of the rope by looping it under the root ball because the climber is likely to be pulled out of the ground by the first strong gust of wind that catches the branch holding the other end of the rope.
Garden structure, such as arches and pergolas, are available in a wide range of styles. The style you choose should fit in with the rest of the garden design to support the chosen climbers. There are many ready made kits on sale in a variety of materials. The rich purple flower can be seen clearly as it climbs up a tripod, bringing interest to an otherwise neglected corner of the garden. Once it is fully grown, the clematis will cover the support completely, so that the tripod cannot be seen. This is how you provide the free standing support to your plant in the garden.
The author is a garden designer as well as a very experienced garden writer and editor. Come visit the author latest websites on trees, plants, bushes and shrubs at Turf Grass Supplies. Besides that, the author also has a particular interest in Quit Smoking Products for healthy living.
Article Source: http://EzineArticles.com/?expert=Sarah_Nabila
