The most common approach to when you see Xbox 360 red flashing lights is to disassemble the unit and adjust the heat sinks by placing water stoppers and clamps that will place more space between motherboard, processor and metal casing. Typically, you need to detach the processor from the motherboard and remove the X-clamps. There are holes in the metal casings that need to be enlarged to fit the washers or the stoppers. Ideally, you use 5mm screws to do the job and then you are done. What this does is to improve the ventilation on your machine.

The other approach is to figure out the number of red light flashing and then use the right solution.

When you see Xbox 360 red flashing lights, specifically four red lights flashing at the same time, this means that you console cannot detect some wires in the system, particularly the AV cable. All you need to is to reconnect the wires and then make sure they are securely in place. Wipe the plug with a clean cloth because dust may be interfering with the signal transmission.

Next, you might see three Xbox 360 red flashing lights and when this occurs, all that needs to be completed from your end is to reboot the console. People exaggerate when they say that there are no solutions to these issues. Perhaps they have used their consoles to the extremes and the consoles overheated. It is normal to see flashing lights since electronic devices will always have downtimes.

The last issue is when you see two Xbox 360 red flashing lights. The best thing to do in this type of situation is to cool the unit. Overheating is normal because gamers will not stop until they have finished or beaten the game. However, consoles also have limits. Once the processors are overworked, they will overheat and they need to be restored to normal temperature before they can work again.