Solving your own Genie garage door issues can be a daunting task. This article will provide you with the solutions to your troubleshooting and technical needs for a few types of issues that can happen with your door and opener.
If your opener runs, but the door does not move, then check the carriage to make sure that it's correctly engaged to the carriage slide. Then place the carriage lever in the lock position securing it firmly. Next, inspect the force adjustment. After that notice how the door opener won't run more than thirty seconds either way if the door does not move at all. Finally, inspect the screw drive units for a striped coupler. This would need to be replaced if you see this kind of problem.
If the remote control has less than twenty five feet of operating range, then move the remote control inside car. Next, point the remote control at the door. After that replace the battery. Next re-attach and position the door opener antenna. Finally, don't attempt to re-tune the remote controls. This will cause them to not work correctly.
If the garage door opener only works from the wall control unit, however it doesn't function when using the remote control, then thoroughly inspect the photocell wires and photocells themselves for any corrosion or other types of damage.
If your unit is loud or noisy when operating, then make sure the door has been well maintained or is in good repair. Also, make sure that the door is correctly lubricated and balanced right. Finally, run the unit rail secured to it to discern between any motor or rail damage that may have happened over time from usage of the unit.
To get your garage door installed today by a professional visit Wayne Garage Doors To get SEO for your website visit Bergen SEO
Article Source: http://EzineArticles.com/?expert=Joe_Fanning
