If you were asked, "Who discovered electricity?" What would be your answer? I'm almost positive (a little electric humor) that Benjamin Franklin and his kite flying tale comes to your mind. It wasn't electricity that Ben discovered in 1752. It was the lightning rod. In 1800, Alessandro Volta constructed the first battery able to deliver a constant electric current. It was Volta, not Franklin, to discover electricity.

Many of the ways we use and deliver electricity today are still the same as in the days of Franklin and Volta. Differences in electrical potential between materials cause current to flow between them. Charges can be produced by rubbing fur or cloth over a non metallic surface. Metal wires are used to transmit electrons over long distances; but one property stands out the most. Electricity can kill!

Today, we have developed many ways to protect ourselves from the harmful effects of exposure to electric current. We use circuit breakers, surge protectors, arch fault, ground fault, and equipment grounding to safely control the flow of electrons from one place to another. Two of these safely systems generate a lot of questions. What is the difference between ground fault and arc fault?

Ground fault circuit interrupt (GFCI) protection has been around for a few decades. It is most commonly seen in areas where water is present. For instance, in modern homes, you will find GFCI protection in the kitchen near the sink, in the bathroom near the water sources, in garages, and any receptacles outside of your home. This type of protection guards against injury by monitoring how much current is flowing through it. If the GFCI detects a difference between the amounts of current leaving as opposed to returning, it shuts off. The missing current has to be going somewhere other than its intended destination. It's going to ground. A horrible place if you happen to be in the middle of the current as it's headed to ground.

Arc fault circuit interrupt (AFCI) protection has only been available to consumers for a few years. Like its parent GFCI, AFCI is designed to detect when electricity is not traveling to its intended destination. Unlike GFCI, AFCI is not protecting against the loss of current to ground. It is guarding against a broken conductor. These broken conductors are the primary cause of home fires in America today.

Primarily, AFCI is required in bedrooms. Bedrooms are notorious for having corded appliances, such as computers, alarm clocks, and desk or floor lamps in them. Many times the cords of these appliances are routed under beds, dressers, or carpets. This is not as safe as it seems. Cords are often cut by the items placed on them. Once severed, the broken conductor will arc. This arcing will continue until the metal is burned through or a circuit breaker trips. Often, the time between the initial cutting of the conductor and the tripping of the breaker isn't quick enough and a fire breaks out. AFCI was designed to detect the initial arc caused by the severed conductor and immediately turn the power off.

In conclusion, electricity is the flow of electrons between items with differing potential. If not properly controlled, this difference can have horrible repercussions, when people or property is in the way. Modern industry has taken great measures to protect us while using one of the most fundamental properties of nature - electricity.