It has to be said that the Xbox 360 is a fantastic console. But it is sad that you are here today looking for ways to fix Xbox 360 red ring of death for good. It has a fantastic graphics processing unit which enables you to feel at one with the games you play. But unfortunately it is this GPU which can often become vulnerable due to extreme heat within the Xbox 360 console and therefore you begin to see the Xbox ring of death on the front of your console.
You will see the Xbox 360 3 red lights displayed on the front of your Xbox glowing red around the power button. the 3 main causes of this error are as follows.
1. Connections coming loose because of high movement within the motherboard.
2. Dry solder connections begin to crack under pressure from intense heat.
3. Your GPU can become infected by this heat due to the heat-sinks being made smaller.
Lets assume that you have very little or basic understanding of what this fantastic console holds electronically. Also that you want to know some information which can help you to fix Xbox 360 red ring of death yourself at home.
1. First of all you need to find where the GPU is located. So you need to firstly switch off all power and then proceed by opening up your console. Next you need to find the GPU and you will see this once you have taken away the DVD and hard disk drives in order to access the graphics processor unit.
2. You may have some loose connections in and around where the GPU is located. If so then you have a simple task of re-soldering these loose connections back together. If you have no loose connections then proceed by taking the heat- sink away from the GPU. Be extremely careful when doing this step because this is where all the heat is soaked up, so if you have been recently playing on your Xbox 360 then make-sure this heat-sink has had some cooling time.
3. Clean the GPU with some alcohol rubbing substance then re-apply the thermal paste onto the top of the GPU. You can buy this paste at any computer gadget or electronics store. Leave to set for a few minutes (10-20 minutes approximately) and when you are satisfied this paste has set you can re-attach the x-shaped clamp back on top which holds everything down evenly.
4. Re-assemble everything back together carefully. Re-connect your DVD and disk drives, place the console outer shell back on and proceed by switching the power back on. Hopefully this should work for you and is a good way of fixing the dreaded red rings of death for good.
Taking the Xbox 360 apart can be quite daunting for people who have spent several hundred dollars on a console. You could pay Microsoft $140 to have your Xbox 360 3 red lights fixed and then wait 6-8 weeks before you will even see it again. Or just Fix Xbox 360 red ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by following step by step video tutorials which will fix any Xbox 360 error permanently by Clicking Here.
Article Source: http://EzineArticles.com/?expert=John_Reed_Smith
